Rope Bow
Door Knocker
The Rope Bow door knocker is a screw on door knocker.
DIMENSIONS & SPACE REQUIRED
Minimum door space required to install: Height 7.5cm, Width: 2.5cm,
Overall Height: 10cm, Overall Width: 6.5cm,
INSTRUCTIONS:
1. Determine position for template and mark screw holes.
2. Drill a small guide hole for each screw at these points (just a few mm deep)
3. Push supplied screws through the holes in the back plate and position over guide holes.
4. Using a flat head screw driver, carefully screw both screws into door to secure the knocker.
TIP - For a symmetrical finish, finish the last turn of the screw so that the screw head lies horizontally.
WE PROVIDE: Door Knocker, Instructions, 2x screws in finish to match door knocker
EQUIPMENT REQUIRED: A drill (for small guide holes only), flat head screwdriver
WANT TO TRY THE TEMPLATE ON YOUR DOOR?
Download the template & instructions here
Ensure you print out A4 with no scaling