Installation Guide

Our door knockers are suitable for wooden, uPVC and composite doors. 

See below for more information about installation of each piece. 

INSTALLATION - Amphibia, Swallow, Knock Knock, Padlock Heart, Scallop Drop  

These door knockers are attached through your door and secured on the inside with decorative bolt caps. Every door knocker is supplied with the components to fit to a standard thickness door and a drilling template to take the guess work out of where to make your holes!

Please see individual product pages images for a video showing installation.  

 

TOOLS NEEDED: 

  • A drill and suitable drill bit to make a hole for a 6mm (6M) bolt.  

 

** Please note that we provide bolts for standard depth doors. Depending on the thickness of your door you may need to cut the bolts to length **

INSTALLATION - Rope Bow, Wings, Rounded Heart 

These door knockers are attached to the front of your door with the screws provided. There will be no fixings seen from the inside of your door. A small drill hole is required for guidance only. 

Every door knocker is supplied with the components and instructions. 

TOOLS NEEDED: 

  • A drill for guide hole only

  • A Flat head screwdriver 

INSTALLATION - Apex House Numbers 

Our door numbers can be installed on walls or on front doors.  We  provide a template, instructions and fixings for both flush and floating wall installation.  Another option is to use suitable adhesive if you wish to avoid drilling.

 TOOLS NEEDED: 

  • A drill and suitable drill bit to make a hole for a 6mm (6M) bolt. 

  • A wood, plastic or rubber mallet (do not use a metal hammer directly on numbers to avoid damage.